Posted on September 10th, 2021
Meet our team on September 23rd at the Aerospace Additive Manufacturing Summit where TME will attend AEROSPACE SMART FACTORY Business Convention dedicated to the Smart Factory for the Aerospace Industry!
During this event, we will present our SMART Solutions to optimize your composites production!
Posted on March 23rd, 2021
Posted on January 26th, 2021
TME, project partner of the european project DEWTECOMP: Developing an innovative induction welding system for aircraft fuselage parts.
Door surround structures (DSSs) are complex parts of an aircraft’s fuselage. To obtain highly integrated DSSs and be able to weld assembly clips on stiffened panels, the EU-funded DEWTECOMP project aims to develop an innovative and efficient induction welding system.
The goal is for the system to achieve a structural bond between reinforcement parts (gussets, wedges, fittings) and structural frames. The design will include supporting tools, automated devices, heating systems, end effectors needed to weld DSS frames to DSS fittings and clamping methods to ensure contact between welding surfaces.
The system will be based on CETMA – European Research Center for Technologies Design and Materials technology, also coordinator of the project.
DEWTECOMP is a 26-month European project that started on 1 May 2020, funded by the Clean Sky Joint Undertaking under the Horizon 2020 Programme.
Posted on January 5th, 2021
Happy New Year !
Posted on December 8th, 2020
Ready for our first fully virtual exhibition !!
Make sure to meet us online #AeromartTLS
Posted on June 29th, 2020
TME is looking forward to connecting with composites manufacturers during JEC BM WEEK!
Posted on June 10th, 2020
Dear customers, dear partners,
For almost three months now, we have been living through a particularly exceptional situation, which affects us all, in every moment of our lives. Concerned about your activities and despite this complicated period, TME has done everything possible to minimize the impact of COVID-19 on its clients.
To go further, TME has rethought its way of working in order to offer you solutions that are always more adapted to your needs.
Today, we are ready to welcome you in the best possible conditions with, in particular, the implementation of a health protocol on all our sites to guarantee your safety but also that of our employees.
If you are unable to travel, we can meet virtually!
We hope to see you soon.
Take care of yourself.
Posted on February 6th, 2020
Explore this article published in CompositesWorld regarding Compression RTM for production of future aerostructures
Posted on January 6th, 2020
Posted on June 10th, 2019
Posted on June 7th, 2019
Meet us at the next Paris Air Show @salondubourget !
Posted on May 21st, 2019
At INNOTOOL 4.0, a consortium formed by TECHNI-MODUL ENGINEERING, the coordinator, and ISOJET EQUIPEMENTS will look to develop advanced tooling and injection system for composite manufacturing. More information available on the following article.
Posted on May 6th, 2019
Posted on April 8th, 2019
Techni-Modul Engineering selected for the INNOTOOL 4.0 project.
For complex shaped and high performance CFRP structures the metal moulding tools currently in use are complex, heavy and expensive. The project aims to develop robust, wear resistant, lightweight, low cost tooling with integrated dynamic controlled electrical heating system, that is suitable for high pressure resin injection processes and complex shaped products
More information on the website of the European Commission:
Posted on March 14th, 2019
Thank you for your visit and see you @JEC World 2020
Posted on February 20th, 2019
Posted on December 21st , 2018
Posted on December 6th, 2018
2 days @AeromartTLS
Posted on October 18th, 2018
Thank you for your visit ! see you next year at #CAMX19 in Anaheim, CA !
Posted on September 20th, 2018
We are finalist in the #CAMX18 Combined Strength Award !! TME and Composite Alliance Corp. will present their advanced tooling & equipment capabilities booth #M58
Posted on June 20th, 2018 >>> TECHDAYS 2018 3rd Edition
Posted on May 21st, 2018
Composite Alliance Corp., will present its advanced tooling & equipment capabilities at the upcoming SAMPE Long Beach, CA, May 22-23 at booth #O38.
Posted on May 16th, 2018
Posted on March 8th, 2018
Thank you for your visit and see you at the next JEC World show 12-14 March 2019 !
Posted on February 27th, 2018
Check this article in the last Innovation Report of the JEC Composite Magazine N° 119 to discover more about our SMART CONTROL innovation
Posted on February 20th, 2018
TME will attend the JEC World 2018 in Paris-Villepinte which will take place from March 6 to 8, 2018. Feel free to come and visit us at our booth.
Posted on December 28th, 2017
Posted on December 12th, 2017
Posted on November 14th, 2017
TME certified EN 9100 – EN 9100 certificate
Posted on October 5th, 2017
Pre-acceptance at TME – Multi-process Press Machine for an american customer
Posted on September 25th, 2017
TME at the Taiwan Aerospace Composites Forum 2017 ! During this event, Serge Luquain, CEO of TME and invited as a keynote speaker, talked about our last innnovations in terms of integrated control: “Intelligent Automated Control and Verification of Ply Placement in Robotic Preforming “.
Posted on June 13th, 2017
Success story !
On May 10th, 2017, Israel Aerospace Industries (IAI) inaugurated its first automated RTM (Resin Transfer Molding) production line designed and realized by Techni-Modul Engineering (TME) at its Tel-Aviv site. The event was attended by the management of IAI, their final customer, TME and many guests.
The introduction of this new production equipment will considerably increase the competitiveness of IAI, in particular by improving cycle times, quality, repeatability and accuracy while reducing the final price per part cost.
This automated RTM production line integrates a robotized draping / preforming station (cutting table, robot equipped with various grippers allowing lay-up fold by fold directly into shape on a 3D mold as well as compacting, trimming and control by camera) and an RTM molding press with tooling and injection system. This automated line will make it possible to carry out operations previously done manually: from the unroll of the material to the final injection of the seat. The operators were trained locally by Techni-Modul Engineering to use this new working tool.
IAI’s Commercial Aircraft Group, designs and manufactures business jets, primary aerostructures and landing gear, servo control and actuator systems for major international OEMs.
Posted on May 19th, 2017
Composite Alliance Corp., will present its advanced tooling & equipment capabilities at the upcoming SAMPE Seattle, May 23-24 at booth #G51.
Posted on February 20th, 2017
TME in the news ! “Composites in Manufacturing”
Posted on February 8th, 2017
We will exhibit at the next JEC Show from March 14-16 at Paris Nord Villepinte.
Come and visit us on our booth F61, Hall 6 to discover and talk about our skills and last innovations. If you want to receive invitations, let us know!
Posted on January 2nd, 2017
Posted on December 9, 2016
Happy birthday TME !!!
Posted on November 15, 2016
JEC Asia Innovation Awards 2016: Techni-Modul Engineering again awarded in the Manufacturing category for its robotized preform cell !
Posted on September 29, 2016
Posted on September 21, 2016
Posted on September 16, 2016
From September 26th-29th will be held the third edition of CAMX. Created by ACMA and SAMPE to connect and advance all aspects of the world’s composites and advanced materials communities, CAMX is an all-encompassing event. Regardless of the application —transportation, aerospace, marine, wind energy, software, construction and infrastructure, medical, academics, sports and leisure —CAMX is the must-attend event for products, solutions, networking, and advanced industry thinking.
Composite Alliance Corp., subsidiary of Techni-Modul Engineering in the US, has been selected as finalist for the 2016 CAMX Awards for its robotized preform cell. The CAMX Award recognizes cutting-edge innovations and innovators that are shaping the future of composites and advanced materials in the marketplace. This year, two rewards will be awarded: «COMBINED STRENGTH » et «UNSURPASSED INNOVATION ».
Composite Alliance Corp. competes in the category “UNSURPASSED INNOVATION” which includes 12 finalists. This award is presented to the composites product that clearly demonstrates a novel design that incorporates low-cost materials for high-volume applications or with high performance applications with low-volume materials which delivers a product that is innovative and has the potential to either significantly impact existing or open new markets.
The CAMX Award winners will be announced during the CAMX General Session on Tuesday, September 27, 2016, at 8:30 AM at Anaheim Convention Center.
Posted on July 25, 2016
The Clean Sky project
Techni-Modul Engineering is part of a strong consortium called Opticoms (Optimized Composite Structures for Small Aircraft)
Opticoms is composed of the Piaggio Company and different partners: IAI (coordinator), Coriolis, Danubat and TME.
The Clean Sky 2 project will deliver break-through technologies for incorporation into the next generations of aircraft from 2025 onwards.
The objective is to research and develop technologies for more affordable composite aero structures with focus on cost effective existing materials and improvement of production technologies for a later full composite wing production.
In “OPTICOMS” we want to lower costs, improve technologies and adapt to low volume wing production.
Posted on May 24, 2016
RAIL EVENT !
Roger Onions, our United Kingdom Sales Manager, is a guest speaker tomorrow at RAIL Industry Event !
He will talk about automating the manufacturing process for composite tooling at 2:30 pm.
Rail Event is a joint event between GTMA, Reshoring UK and Rail Alliance.
WHEN : 25 May 2016 from 09:30 to 15:00
WHERE : Alcester, UK.
Posted on May 6, 2016
Techni Modul Engineering at JEC Americas 2016 !
JEC Americas Composites Show and Conferences is an international conference exhibiting innovations in composites manufacturing focusing on the automotive and aerospace industries. This event allows us to meet, seal partnerships and develop our business worldwide.
This 5th edition of JEC Americas took place from May 3-5 in Atlanta and drew about 750 exhibitors and more than 9,000 visitors !The trade show went very well, we had the opportunity to meet many companies. Here is a photo of the stand of our subsidiary. See you next year !