Compaction/Hot Drape Forming

The drape forming, vacuum forming and compaction tables are designed to increase the efficiency of the fabrication process and the quality of the components. They satisfy from the most basic to the most sophisticated requirements.


Standard – TME/CT series

Our standard range offers:

  • A choice among  heating plate and/or IR heating
  • A membrane with 250%  or 600% elongation
  • An aluminum frame structure
  • Manual or automatic opening/closing and clamping system
  • A vacuum system that allows 250 mbars/3.6 PSI or 50 mbars/0,7 PSI
  • Possibility of adding a compaction trough for high size tooling

Available standard sizes:

Reference MM
TME/CT-110 1000X1000
TME/CT-210 2000X1000
TME/CT-310 3000X1000
TME/CT-410 4000X1000
TME/CT-315 3000X1500
TME/CT-415 4000X1500



Hot drape forming

Designed upon request.  Different possibilities of movements for either fixed or mobile upper/lower frames.


  • Sizes and configurations according to the need
  • Reliable and repeatable performance
  • No fiber wrinkling
  • Cost-effective
  • Versatility of use
  • Including heating/cooling groups, vacuum unit and PLC

The PLC interface allows:

  • The choice and control of the upper and lower frames’ movements (translations),
  • The input of the process parameters (heating cycle, vacuum, …),
  • The recording of the process parameters (temperature and vacuum curves, visualization of the process state in real time).
  • The system will give access to three modifiable programs (operator, programmer and maintenance), and the piloting of the machine can be carried out by using a remote control.